U.S. Wood Pellet Markets: What Developers and Investors Need

How the U.S. wood pellet market is sized, who buys, what pellets sell for and what decides whether a woody-waste-to-fuel project can be financed.

Woody Biomass

Editorial image for “U.S. Wood Pellet Markets: What Developers and Investors Need”

The U.S. wood pellet market is an export-led commodity market with a small domestic heating segment, and it rewards projects whose feedstock, offtake and funding are settled before construction. In August 2026, U.S. manufacturers reporting to the Energy Information Administration sold 0.85 million tons of pellets, of which 0.71 million tons went to export and 0.14 million tons stayed in the domestic market. That split is the first thing to understand if you are developing a woody-waste-to-fuel project, backing one, or sitting on the board of a company that wants to build one.

This guide is written for founders, developers, boards and investors, not for pellet-stove owners. It covers how the market is measured, who buys, what pellets sell for, what the feedstock chain looks like and where projects tend to be won or lost.

TL;DR

  • In August 2026, EIA-reporting manufacturers sold 0.85 million tons of pellets, 0.71 million tons of it for export: the market is driven by overseas demand far more than by U.S. heating.
  • The same EIA release put average August 2026 sales at $246.98 per ton domestically and $203.25 per ton for export. Prices are reported as averages, not as a retail quote.
  • Feedstock is the largest cost line and the biggest competitive question, because pellet mills compete with sawtimber, pulp and composites for fiber.
  • Financeability depends on long-term feedstock supply, contracted offtake and sponsor liquidity, not on market-size headlines.
  • Analyst reports with multi-billion-dollar forecasts disagree widely. Use federal data for sizing and build the project case from your own feedstock and contract position.

Table of Contents

How big the U.S. market is, and how to measure it

Search results for this topic are dominated by commercial forecasts, and they do not agree. They put the global pellet market anywhere from roughly $8 billion to $15 billion in the base year, with growth rates between 5.8% and 8.2%. Those definitions differ on what counts as a pellet (biomass, biofuel, wood only) and on geography. For a project decision, the better starting point is what U.S. producers actually report.

The EIA collects monthly data on Form 63C. Its biomass data page shows that in August 2026 there were 74 reporting manufacturers with 13.2 million tons per year of capacity. Respondents produced 0.94 million tons that month. Two limits matter when you read these numbers. Facilities with annual capacity of at least 10,000 tons report monthly, while smaller facilities report capacity once a year, so the monthly series is not a census of every small producer. And feedstock purchases in a given month do not map neatly to production in the same month.

The Pellet Fuels Institute, the trade association for the pellet industry, adds a seasonal and regional view. Its October 16, 2026 update reported July sales of 118,525 tons, production of 150,599 tons and inventories of 265,492 tons. The five-year averages for the same month were 120,245 tons sold, 136,240 tons produced and 317,396 tons in inventory. Regional inventory at the end of July was 110,381 tons in the East, 105,220 tons in the West and 49,891 tons in the South. Note that these figures describe the packaged, mostly heating-grade segment and the EIA figures describe the wider reporting base, so the two series should not be added together.

For a pipeline view, Forisk's Q4 2026 Wood Bioenergy US project list tracks 373 operating and announced wood-using bioenergy projects with potential wood use of 110.9 million green tons per year. Forisk says 347 pass its viability screening, representing 93.0 million green tons per year, spread across 123 projects in the North, 141 in the South and 83 in the West. The database covers more than pellets, so treat it as a map of wood demand competing for the same fiber, not as an output forecast.

Comparison of U.S. pellet market data sources

Who buys U.S. pellets

Demand falls into three groups, and they behave differently.

Export utility buyers. The U.S. International Trade Commission's 2022 working paper identifies European climate policies and incentives as the catalyst for growth in utility-pellet consumption, with U.S. producers expanding exports primarily to the United Kingdom and other European markets. It reports that U.S. pellet exports reached $1 billion in 2021. That is a historical marker of scale, not a current revenue estimate. The Department of Energy's national laboratory Pellet Industry Overview adds that export demand drove the expansion of large-scale production, especially in the Southeast, where forest resources, labor, infrastructure and port access came together. It also notes that European utility supply contracts typically carried fixed prices and ran five to six years.

Domestic residential heating. The EIA lists residential pellet stoves and furnaces among the uses, alongside commercial-building boilers and industrial thermal uses such as electricity generation. The same overview report explains that residential demand depends on how pellet prices compare with heating oil and propane, and on the convenience of automatic feeding compared with traditional fuelwood burners. Resources for the Future describes domestic pellets as commonly burned in residential stoves, often as a supplementary heat source, and notes animal bedding as a non-energy use.

Commercial and industrial thermal. Boilers in commercial buildings and industrial plants are a smaller, steadier segment, and the one that matters most for projects that want a domestic offtaker rather than a port.

The practical lesson for a developer: a project aimed at export is selling into a policy-driven market with long fixed-price contracts, while a project aimed at domestic heat is selling into a seasonal, price-sensitive one. They need different financing structures.

What pellets sell for

The EIA reports that August 2026 average domestic sales were $246.98 per ton and average export sales were $203.25 per ton. The domestic figure combines retail and wholesale sales, so it is not a bagged retail price. These are monthly averages that move with heating season, feedstock cost, energy prices and contract mix, and EIA updates them monthly. Your own model should use the live EIA table and your own offtake terms, not a number quoted in an article.

For context on cost structure, the 2017 Pellet Industry Overview estimated that Southeast fiber costs, including transport, ran $45 to $70 per dry ton, about one-third of plant-gate production costs. Its historical table put plant-gate costs at $105 to $120 per ton and FOB (free on board, meaning delivered onto the ship) costs at $120 to $138 per ton. Those are 2017 estimates and costs have moved since, but the proportions are instructive: fiber is the biggest single line, so anything that stabilizes its price or availability moves the whole case.

A 2010 techno-economic analysis in the journal BioResources reached the same conclusion from a modeling angle. It found a modeled plant most sensitive to biomass and labor costs, followed by energy and capital expenditure. Its case-study values are dated, but its sensitivity ranking holds up as a way to structure your own model.

From woody waste to fuel: feedstock and process

The long-tail question behind this keyword, how woody waste becomes fuel, has a clear answer. The U.S. Forest Service's feedstock yard guide lists forest and mill residues, orchard trimmings, construction and demolition wood and other woody biomass as potential feedstocks. It names pellets and transportation fuels as possible products, and it flags collection, transportation, handling and low bulk density as the constraints on using the resource.

In the U.S. Southeast, IEA Bioenergy's case summary says pellet feedstock commonly includes forestry-industry residues and some otherwise unmerchantable timber. Processing runs through chipping, hammering, drying and milling before pelletizing, then transport to port. A 2026 market page from IndexBox describes the same plant-level chain as procurement, drying and sizing, densification, cooling and screening, and names consistent feedstock quality, drying energy, sustainability certification and product durability as the operating challenges.

The scale of woody-waste projects can be large. A project planned in Williams, California would process orchard trimmings and forest debris into up to 250,000 tons per year of biocarbon pellets, according to a 2024 Industrial Info Resources report. That is an example of planned scale, not proof of operating output.

Two points follow for a developer. First, the process is well understood, so the technical risk in a pellet plant is mostly about consistency: moisture, particle size and ash, which come straight from feedstock. Second, the same wood has other buyers. IEA Bioenergy notes that pellet feedstock is generally used when it is not more valuable in sawtimber, pulp, paper, fiber or composites, which puts a mill in competition with established wood industries. We cover that link between feedstock and capital in when feedstock variability becomes a financing risk.

From woody waste to fuel: feedstock and process

Where project economics are decided

The Pellet Industry Overview identifies feedstock willingness-to-pay and competing forest-products industries as key determinants of a mill's economics, and makes the point that access to wood alone does not guarantee economical supply. In practice, five questions decide whether a project can be financed:

  1. Is the fiber contracted? The BioResources analysis found that long-term supply agreements near the wood basket can reduce exposure to feedstock cost changes, and that material availability and haul distance strongly affect biomass costs. Lenders will want haul-radius maps and contract terms, not a statement that residue is plentiful.
  2. Who buys, for how long, at what price structure? A fixed-price multi-year contract with a creditworthy buyer is a different asset from spot sales into a heating market.
  3. Which market is the product designed for? Export-grade industrial pellets, premium residential pellets and biocarbon products have different specifications, certifications and margins.
  4. Can the plant reach nameplate output? Drying energy and feedstock quality decide this, and they should be designed in, not discovered at commissioning.
  5. Who funds the gap? Development capital before financial close is the scarcest money in the sector, and it is where many projects stall.

The risks investors and boards should price

The export-led structure cuts both ways. The USITC account shows that overseas renewable-energy policy can create demand for U.S. production, while concentration in a few destination markets creates exposure to policy and trade changes. A board approving an export-focused plant should ask how much of the revenue depends on one country's rules, and what the plan is if that changes.

Sponsor liquidity is the second lesson. The 2024 Industrial Info Resources report describes how Enviva, one of the largest producers, faced financing distress and exhausted a stated credit line for two proposed projects. The point for sponsors is not the company, it is the structure: a project with several sites in development and a fixed pool of capital needs a funding plan that survives delays.

Third, feedstock. The Forisk database shows 93.0 million green tons per year of potential wood use across projects that pass its viability screen. When that much wood demand is announced across the same regions, the question for any single project is who is already buying the fiber near the site.

Finally, treat commercial market-size forecasts as context only. A press-release CAGR does not tell you whether your mill's fiber basket, offtaker and capital stack close.

Our perspective

Most pellet market commentary starts with a big global number. Projects do not get built on that number. They get built when someone has lined up fiber, a buyer and the money, in that order, and has tested each against what a lender will ask.

At Sharon Creek Ventures, we are a founder-led energy advisory and venture studio, and woody waste-to-fuel is one of the areas we focus on. Our view comes from founder-side execution on prior energy projects: every commercial, technical and financial dependency has to be addressed together to improve financeability and buildability. A feedstock contract that does not match the offtake term, or a plant design that ignores fiber variability, is a financing problem long before it is an engineering one.

The pellet market data is useful because it shows where the real constraints sit: fiber cost, export concentration, contract length and sponsor liquidity. For founders, that means designing the project around those constraints from day one. For investors and boards, it means asking for the supply, offtake and capital plan before the market-size slide.

Sam

Working with us on a woody-waste or pellet project

If you are developing a woody-waste-to-fuel project, we advise founders, developers and boards on capital strategy, board leadership and venture studio formation. Our woody waste-to-fuel work is one of our core areas, and our article on renewable project development stages, risks and financing sets out how we think about getting from concept to financial close. To discuss your project, see how to work with us.

FAQ

How large is the U.S. wood pellet market?

The EIA's August 2026 data show 74 reporting manufacturers with 13.2 million tons per year of capacity, and 0.85 million tons sold that month, most of it exported. Commercial reports quote much larger dollar figures for the global market, but their definitions differ, so use EIA data for U.S. sizing.

How much does a wood pellet cost?

EIA reported average August 2026 sales of $246.98 per ton domestically and $203.25 per ton for export. The domestic average mixes retail and wholesale sales, so a bagged retail price will differ. EIA updates the figures monthly.

What are wood pellets used for?

They fuel residential stoves and furnaces, commercial boilers and industrial thermal uses including electricity generation, according to the EIA. Large volumes are exported to utilities in the United Kingdom and elsewhere in Europe, as the USITC paper describes.

What feedstocks can become fuel?

The Forest Service lists forest and mill residues, orchard trimmings and construction and demolition wood, among others. The right choice depends on supply volume, haul distance, quality consistency and what competing wood buyers pay in your region.

Sources

Turn your energy visions into reality.

Bring Sharon Creek in when the project needs more than advice—when interconnects, contracts, capital, incentives, and execution all have to come together.

Start a conversation